what is a 035 orifice size for pressure washer nozzle

Natashya

3 min read

·

24-12-2024

1

0

Share

A 035 orifice size in a pressure washer nozzle refers to the diameter of the opening where the water jets out. Expressed in thousandths of an inch, 035 means the hole is 0.035 inches wide. This seemingly small detail significantly impacts the pressure washer's performance and the type of cleaning tasks it's best suited for. Understanding orifice sizes is key to choosing the right nozzle for your cleaning needs.

Understanding Pressure Washer Nozzle Orifice Sizes

The orifice size directly correlates to the spray pattern and cleaning power of the nozzle. Smaller orifice sizes generally create higher pressure and narrower spray patterns, while larger orifice sizes produce lower pressure and wider patterns. A 0.035-inch orifice falls somewhere in the middle, offering a balance between pressure and coverage.

035 Orifice Size: Pressure and Spray Pattern

A 035 orifice nozzle typically produces a relatively focused stream, but not as narrow as a smaller orifice size like a 025. This makes it versatile for various cleaning applications. The pressure is substantial enough for tackling moderate to tough grime, but not so intense as to cause damage to delicate surfaces.

Applications for a 035 Orifice Nozzle

This size nozzle is a good all-around choice for many cleaning tasks. Here are a few examples:

• Cleaning cars and trucks: The balanced pressure effectively removes dirt and grime without causing scratches.
• Cleaning decks and siding: It tackles stubborn stains and mildew on various surfaces.
• General cleaning of patios and driveways: It's suitable for removing dirt, leaves, and other debris.
• Light-duty industrial cleaning: It can be effective for cleaning equipment in settings where very high pressure isn't necessary.

Comparing 035 to Other Orifice Sizes

It's helpful to compare a 035 orifice nozzle to others to understand its place in the range of available options:

• Smaller orifices (e.g., 021, 025): These produce higher pressure and narrower sprays, ideal for pinpoint cleaning or removing very stubborn stains. They can be more damaging to surfaces if not used carefully.

• Larger orifices (e.g., 041, 050): These create wider spray patterns with lower pressure, better for washing larger areas quickly and for less demanding cleaning tasks. They are less effective for deep cleaning or removing ingrained dirt.

Choosing the Right Orifice Size for Your Needs

The best orifice size depends entirely on your cleaning needs. Consider the following factors:

• Surface material: Delicate surfaces require lower pressure nozzles.
• Type of dirt: Stubborn grime needs higher pressure.
• Area to be cleaned: Large areas benefit from wider spray patterns.

Frequently Asked Questions (FAQs)

Q: What pressure does a 035 orifice nozzle produce?

A: The exact pressure depends on the pressure washer's PSI (pounds per square inch) rating. A higher PSI pressure washer will produce a higher pressure stream with a 035 nozzle than a lower PSI model. The nozzle itself doesn't dictate the pressure, but rather modifies the stream from the existing pressure.

Q: Can I use a 035 nozzle on all surfaces?

A: While versatile, using a 035 nozzle on all surfaces isn't always recommended. Always test on an inconspicuous area first, particularly with delicate materials like painted wood or aluminum siding. Higher pressure could cause damage.

Q: Where can I buy a 035 orifice nozzle?

A: Pressure washer nozzles are readily available at most home improvement stores, online retailers, and equipment suppliers. Always ensure you're getting a nozzle compatible with your pressure washer's connection type.

Choosing the correct pressure washer nozzle is crucial for efficient and effective cleaning. By understanding orifice sizes, like the 035, you can select the best tool for the job and avoid damaging surfaces or wasting time and effort. Remember to always consult your pressure washer's manual for recommended nozzle types and safety precautions.